Industrial Metal Shelving
Industrial Shelving - Metal Shelving - Steel Shelving - Heavy Duty - Adjustable Shelves
Store Rooms and Stock Rooms - Shelving Storage Systems - Closed Units and Open Units

Providing Quality

Storage Equipment
Making the most of your Storage Space!
Toll Free:  800-352-0272
Toll Free Fax:  800-353-3681
Home Setup an Account Ordering Info Order Form Customer Service Contact Us

Open and Closed Style Industrial Shelving

Box Shelves Heavy Duty  Provided in each unit for Maximum Durability

Open Shelving Units

Closed Shelving Units
Built  Tough for Industrial Use
Lighter Duty suited for Back Office Supply Use 
and lightweight parts applications
Common Applications

Light Duty 

22 ga. shelves  
Supply Rooms,  Supply Rooms, Automotive Parts, Office and some light industrial Choose from the following:
5 shelf units listed with adder for additional shelves
6'1"  high units - (73" high)

Open Units
Closed Units
7'1" high Units - (85" high)

Open Units
Closed Units
Medium Duty:  
20 ga shelves
Multipurpose storage for: Maintenance Shops, Store Rooms, Tool Cribs, General Storage Applications Box Shelves are stronger than normal flanged shelfs, no need for rebars, or class 1 or class 2 reinforcements!
*Other heights and shelf configurations available
Heavy Duty:
18 ga shelves
Industrial applications, heavy weights, Maintenance Shops
Mill Store Rooms

Specifications:     Clip Style  Box Shelving

  ANGLE UPRIGHTS: Angle upright constructed of 14 gauge steel, formed into an angle formation with one leg of the angle being 1" and the other leg being 1-7/8". The 1-7/8" leg has a 1/2" deep offset with square slots in it to accept the shelf clip and to allow the shelf to fit flush with post face. Each face has holes to allow shelves to be bolted into place on either left or right of post. Uprights designed to allow for shelves to be adjustable on 1-1/2" centers using either bolts of shelf clips.

  SHELF: Shelves shall be constructed of 18, 20 or 22 gauge steel with full welded box formation in front and back of shelf and shall have formed channels on both ends. All corners shall be fully lapped and welded in each corner. The box formation shall be welded on a minimum of 6" centers, the entire length of the box. All shelves shall have a profile height of 1-1/4''. Shelves shall be designed to allow for use of shelf clips or to allow shelf to be bolted to uprights.

  SHELF CLIP: Shelf clip shall be constructed of 13 gauge steel formed into channel with two hooks to engage upright. Hooks on clip shall be a minimum of 3/8" wide and must engage into post a minimum of 1/4". Shelf clip shall engage upright post at two points and hooks shall be on 1-l/2" centers. Shelf clip shall be plated with a durable coating to give extra life to clip.


END & BACK PANELS: End and back panels shall be formed of 24 gauge steel.


 SWAY BRACES: Sway braces are of 13 gauge steel, installed to form an
"X" on both back and sides and shall be adjustable on 1-1/2" centers.

Color Selections:    

Gray, Sand, Blue, Pearl White, Putty, Red, Black

Gray Sand Blue Pearl White Putty
      Red  Black

Back to Shelving Selections

Copyright Equipment and Supply Central 2012